Fine Tooth Wool/Fiber Hackle & Comb Set

Take your fiber preparation to the next level with my top-tier fine tooth hackle and matching wool comb set. Expertly designed for spinners, weavers, and fiber artists alike, this set provides the perfect balance between durability, precision, aesthetic appeal, and ease of use. Contains one fine tooth hackle and one fine tooth wool comb in the same matching configuration — single, double, or triple row.

Key Features:

• ✓ Complete matching fine tooth set — hackle and comb in same configuration (single, double, or triple row)
• ✓ Premium materials — sustainably sourced hardwood (Maple and Hickory) with polished stainless steel tines
• ✓ Tempered stainless steel tines — Won't rust or deteriorate over time
• ✓ Fine tooth spacing — .1875" on center for detailed fiber prep work
• ✓ Ergonomic comb handle — thoughtfully designed for comfort and reduced hand fatigue
• ✓ Secure hackle mounting — designed for use with C-clamps or Studio Hooks
• ✓ Versatile use — ideal for fine fibers, wool, alpaca, and other luxurious blends
• ✓ Professional results — creates smooth roving and beautifully prepared fiber for spinning

About the Hackle

Overall dimensions are between six and twenty-two inches by 1 1/4" by 1". The tines are seated ½" deep following the taper — strictly an aesthetic choice, except on the 3.5" hackle which is designed to be used as a fixed comb attached to a table. Each tine drops down an amount equal to the taper on each side, finished with a 45° chamfer on all edges. These provide a full 3", 6", 12", or 18" of working space from end to end.

Note: The 3.5" size refers to the equivalent comb head width — this hackle was designed as a direct replacement for a comb and combing pad setup at a comparable price point. The working tine area is 3".

To secure to a table or any other sturdy surface, there's a ½" ear on each side for a clamp. The holes are .25" diameter for an L-style hook.

Hackle Dimensions

Fine Tooth Configuration

Tine density is .1875" on center, and .1875" between rows. Tines are 3/32" (0.09375" / 2.38mm).

Number of Tines — Fine Tooth Hackle

About the Comb

Hand crafted from premium Maple with ergonomic handles turned from Maple or Hickory. Very lightweight at 7–10 ounces per comb — built tough with precision and durability in mind. The tines are tempered stainless steel and will not rust or deteriorate over time. The wood is hand rubbed with eco-friendly Danish oil, sanded, and reapplied until smooth. Heads are linearly matched or book matched depending on availability.

Fine Tooth Tine Density

Spaced 3/16" apart between rows and each other.

Number of Tines — Fine Tooth Comb

How to Use

As a tool for combing, de-vegging, straightening, aligning, and the overall general prepping of your fiber for spinning or carding. Creating roving is super easy with a diz — load on your mix of fibers and gently pull your roving through the hole as you glide along the width of the hackle.

If you would like Studio Hooks to secure your hackle to a table, check out my Studio Hooks.

If you would like protective covers for your hackle, check out my Hackle Covers.

If you would like covers for your combs, check out my Comb Covers.

If you want just the fine tooth hackle, check out my Fine Tooth Wool/Fiber Hackle.

If you need a standard tooth configuration, check out my Standard Wool/Fiber Hackle.

If you want individual fine tooth combs, check out my Fine-Tooth Wool/Fiber Combs.

If you need standard tooth combs, check out my Standard Wool/Fiber Combs.

Browse my full hackle lineup in my handmade wool hackles collection.

If you have any questions, comments, or concerns about this or any of my products, please don't hesitate to contact me. I'm always here to answer questions and give advice or tips on any of my products and their uses. I typically respond within five minutes, which I believe is extremely important in building rapport, credibility, and getting to know you as a customer.

Proudly Made in America

Thank you so much for considering my shop.

General Product Safety Regulation (GPSR) Information

• Intended Use: Designed for fiber preparation, ideal for combing fleece for spinning and fiber processing activities. Smooths and aligns fibers, removes debris and vegetable matter for cleaner wool. Hackle must be securely mounted to a stable table or work surface using Studio Hooks or C-clamps. Combs are handheld tools with ergonomic handles.
• Not a Toy: Keep out of reach of children—this product contains sharp metal tines and is not suitable for anyone under the age of 12.
• Potential Hazards: Contains sharp metal tines that may cause injury if mishandled. Keep away from small children and pets. Use with caution to avoid punctures or scratches. Use protective gloves if desired. Always use protective covers when hackle or combs are not in use. Ensure hackle is securely mounted before use to prevent tipping or movement.
• Usage Instructions: Securely mount hackle to a stable table or work surface using Studio Hooks or C-clamps before use. Ensure mounting is stable and will not tip or move during fiber processing. Hold combs by ergonomic handles during use. Always handle tines with care. Use protective covers when combs are not in use or during storage and transport. If tines become bent or damaged, discontinue use and contact manufacturer.
• Care and Maintenance: Wipe wooden bodies clean with a dry or slightly damp cloth. Check tines regularly for damage or bending. Reapply Danish Oil finish as needed to maintain wood. Store in a dry environment with protective covers in place.
• Disposal Instructions: Hackles and combs are made from durable materials including hardwood (maple, hickory), stainless steel tines, and Danish Oil finish. Wood bodies may be recyclable or compostable depending on local guidelines. Stainless steel tines should be recycled as scrap metal. Dispose of responsibly according to local waste regulations.

Riley Wood and Fiber Art

Spokane, WA 99217

jason@rileywoodandfiberart.com