Adjustable Yarn Swift/Skein Winder

Adjustable Yarn Swift/Skein Winder

$100.00
Skip to product information
Adjustable Yarn Swift/Skein Winder
  • Adjustable Yarn Swift/Skein Winder
  • Adjustable Yarn Swift/Skein Winder
Adjustable Yarn Swift/Skein Winder

Adjustable Yarn Swift/Skein Winder

$100.00
Satisfaction Guarantee & Returns

100% Satisfaction Guaranteed

We stand behind the quality of our handmade tools. If you're not completely satisfied with your purchase, contact us within 30 days for a return or exchange.

All products are crafted with care in Spokane, WA and built to last a lifetime.
Shipping

Free shipping on all domestic orders over $35

Orders are processed quickly and ship from Spokane, WA. Most orders ship within 1-2 business days.
Manufacturing

Every piece is handmade with care in Spokane, Washington since 2013.

We use premium hardwoods and eco-conscious finishes to create heirloom-quality fiber tools built to last a lifetime. Each tool is carefully crafted in small batches with attention to detail and a commitment to sustainability.

All materials are sourced responsibly and finished with food-safe, non-toxic oils.

🇺🇸

Handmade in USA

♻️

Eco-Conscious

📦

Free Ship Over $35

✓

Since 2013

🎉 Pre-Order Now — Ships by September 30, 2026

I'm currently taking pre-orders on the Adjustable Yarn Swift. These are being handcrafted now and will ship no later than September 30, 2026. Order today to be among the first to get yours. I'll keep you updated every step of the way, and as always, I'm just a message away if you have any questions.

A yarn swift that locks in exactly where you need it — every time.

This Fully Adjustable Yarn Swift - gives you complete control over your skein length. Each arm features a sliding block with a thumbscrew — slide it to where you want it, tighten the thumbscrew by hand, and it stays exactly there until you're ready to change it. One arm is marked at the 1, 1.5, and 2-yard positions so you can dial in a perfect, consistent skein in seconds. But the sliders aren't limited to those marks — position them anywhere along the arm and lock them there.

Slightly heavier than my standard swift, as more should be expected out of this precision tool. It's built for crocheters, knitters, spinners & weavers who want precision without compromise.

Two Ways to Use It:

  • Skeining from a bobbin or center-pull ball: Slide each block to one of the marked positions — 1, 1.5, or 2 yards — and gently tighten the thumbscrew. Wind your yarn around the slider uprights, counting revolutions. Every wrap is a known, fixed length, so the math is simple: wraps × skein setting = total yards.
  • Winding into a ball or cake: Place your existing skein on the swift, then slide each slider outward until it meets the skein snugly. Gently tighten the thumbscrew to hold that position. The swift now holds your skein at the correct tension for smooth, even winding onto a ball winder — no collapsing, no tangling.

Key Features:

  • ✓ Fully adjustable sliders on every arm — sliders can be positioned anywhere on the arm, tighten the thumbscrew by hand to lock in place; loosen to adjust when a different skein size is needed
  • ✓ One arm marked at 1, 1.5, and 2-yard positions for instant, repeatable skein lengths
  • ✓ Slightly larger build for greater versatility with longer skeins
  • ✓ Ultra-low 2.5" profile keeps yarn close to the tool — less arc, more control, for cleaner, more precise winding onto bobbins, ball winders, or shuttles
  • ✓ Rubber feet on the base keep the swift firmly in place on any surface while you wind — no slipping, no chasing
  • ✓ Square arms fit precisely into precision-cut square holes in the carousel for a solid, wobble-free connection at every setting
  • ✓ Precision-crafted components and hand-fitted joinery — every part is built and assembled to exacting tolerances so the tool performs as refined as it looks
  • ✓ Exceptionally balanced rotation — the carousel spins true and stays true, so winding and unwinding feel smooth and effortless from the first wrap to the last
  • ✓ Every corner finished with a 45° chamfer for a smooth, refined feel in hand
  • ✓ Included plastic washer lets you tune your winding experience — use it for reduced friction and faster, free-spinning winding, or remove it when maximum tension control is what the yarn demands
  • ✓ Fully breaks down for compact storage — arms and carousel disassemble quickly and pack neatly into the included bag
  • ✓ Includes a winding handle for smooth, comfortable skein winding by hand
  • ✓ Proudly handcrafted in America

Three Marked Lengths. Lock In Anywhere.

  • 1-yard setting — ideal for small samples and color tests; count wraps to track yardage precisely
  • 1.5-yard setting — a practical middle ground for winding longer samples or smaller project skeins
  • 2-yard setting — winds to the industry-standard skein length, perfect for dyeing, displaying, gifting, and calculating total yardage
  • Any length in between — slide, lock, and wind at whatever position your project demands

Built for Crocheters, Knitters, Spinners & Weavers

Crocheters can use this swift to hold a hank or skein open and under light tension while winding yarn by hand or with a ball winder, helping keep the yarn from collapsing, twisting, or tangling before starting a project.

Knitters can use it to hold skeins at the right tension while winding yarn into balls or cakes, making it easier to prepare project yarn neatly before casting on.

Turkish Drop Spindle spinners can use this swift to wind finished bobbins into measured skeins, count yardage, prepare skeins for washing or dyeing, or unwind a skein smoothly onto a ball winder.

Weavers can use it to measure yarn before winding handmade boat shuttle bobbins, portion yarn for smaller projects, or prepare consistent lengths before moving to the loom.

However you work, the Fully Adjustable Yarn Swift is designed to fit naturally into your process.

Counting Yardage:

Because each revolution equals a fixed, known length, the math is simple: wraps × skein setting = total yards. Wind 50 wraps on the 2-yard setting and you have exactly 100 yards. No scale, no estimating — just an accurate count every time.

What's Included:

Each Yarn Swift - ships complete and ready to use: base with rubber feet, carousel, 4 arms, 4 sliders with thumbscrews, plastic washer, 1/4" handle, four 3/8" uprights, and a carry bag to keep everything together when you're not at the bench.

Care & Storage:

Wipe clean with a dry cloth after use. Avoid prolonged exposure to moisture or direct sunlight, which can cause wood to warp or check over time. Store flat or hang when not in use. Inspect the arms, sliders, and thumbscrews periodically — a well-cared-for hardwood tool will last for years of studio use.

If you have any questions, comments, or concerns about this or any of my products, please don't hesitate to contact me. I'm always here to answer questions and give advice or tips on any of my products and their uses. I typically respond within five minutes, which I believe is extremely important in building rapport, credibility, and getting to know you as a customer.

Proudly Made in America

Thank you so much for considering my shop.

Frequently Asked Questions — Adjustable Yarn Swift/Skeiner

The swift winds skeins in three fixed lengths — 1 yard, 1.5 yards, and 2 yards. The arms lock into precision-cut square holes in the carousel at each setting, so every revolution is a known, exact distance. Count your wraps and multiply by your setting to get your total yardage — no scale, no guessing.

The math is simple: wraps × skein setting = total yards. For example, 50 wraps on the 2-yard setting gives you exactly 100 yards. 30 wraps on the 1.5-yard setting gives you 45 yards. Because the arm length is fixed at each setting, every revolution is consistent.

Yes — the swift works in both directions. Wind yarn onto the swift to measure and skein, or wind from the swift onto a ball winder to prep yarn for knitting or weaving. The rubber feet keep the base firmly in place on any surface while you wind.

The plastic washer gives you control over winding tension, so you can dial in the right resistance for whatever you're working with — from delicate lace singles to bulky worsted weight. It works with spun yarn, hand-dyed singles, plied yarn, and most fiber types.

It's built for both. Weavers can use it to wind boat shuttle bobbins or measure out a specific warp length — knowing exactly how many yards you have before you sit down at the loom. The fixed-length settings and tension control make it equally at home in a spinning studio or a weaving studio.

The swift ships complete and ready to use — no tools required. It fully breaks down for compact storage: the arms and carousel disassemble quickly and pack neatly into the included carry bag. It's easy to take to a fiber festival or tuck away between sessions.

The swift is made from premium hardwood with no finish applied — natural wood only. Every corner is finished with a 45° chamfer for a smooth, refined feel in hand. To care for it, wipe clean with a dry cloth and avoid prolonged exposure to moisture or direct sunlight.

General Product Safety Regulation (GPSR) Information
Product Safety Information

GENERAL PRODUCT SAFETY REGULATION (GPSR) INFORMATION

Intended Use:
Handcrafted adjustable yarn swift designed to hold skeins of yarn for controlled winding or unwinding.

The Adjustable Yarn Swift may be used by crocheters, knitters, spinners, and weavers for handling skeins of yarn.

Product Construction:
• Base with rubber feet
• Rotating carousel
• Four removable arms
• Four adjustable slider uprights
• Four thumbscrews
• One 1/4" handle
• One washer

One arm includes reference markings for common skein circumferences:

• 1 yard
• 1.5 yards
• 2 yards

These markings are reference positions only. The slider uprights are continuously adjustable and are not limited to those three settings.


CAUTION — ROTATING TOOL

The carousel and arms rotate during normal use.

• Keep fingers, hands, hair, loose clothing, jewelry, and other objects clear of the rotating arms and uprights

• Maintain control of the Swift while winding or unwinding yarn

• Do not reach into or through the rotating Swift

• Stop rotation completely before making adjustments

• Do not adjust the slider uprights while the Swift is rotating

• Do not adjust the slider uprights while yarn is under tension

• Keep away from children and pets

• This is a yarn-handling tool, not a toy


BEFORE EACH USE

Inspect the Adjustable Yarn Swift before use.

Do not use the Swift if:

• The base, carousel, or an arm is cracked, split, severely warped, or damaged

• An adjustable slider upright is cracked, loose, damaged, or cannot remain securely positioned

• A thumbscrew is damaged or cannot securely hold its slider upright

• The 1/4" handle is loose, cracked, or damaged

• The rotating carousel binds or does not rotate normally

• A component is missing

• Any component has become unstable

• Any other damage could interfere with safe or normal operation


ASSEMBLY

Place the base on a stable, level work surface.

Make sure the rubber feet are in contact with the supporting surface.

Install all four arms securely into the rotating carousel.

Install the 1/4" handle in its intended location.

Confirm that:

• All four arms are fully and correctly installed

• The handle is properly seated

• The carousel rotates freely

• The base remains stable

Do not use the Swift with an arm missing or improperly installed.


ADJUSTING FOR SKEIN SIZE

Position one adjustable slider upright at the desired location on an arm.

The reference markings on one arm indicate common skein circumferences of:

• 1 yard
• 1.5 yards
• 2 yards

The uprights may also be positioned between these reference markings to accommodate other skein sizes within the usable adjustment range.

After positioning the first upright:

• Position each of the remaining three uprights the same distance from the center of the Swift

• Confirm all four uprights form an even, balanced arrangement

• Hand-tighten each thumbscrew sufficiently to hold the upright securely

Do not use tools to tighten the thumbscrews.

Do not overtighten.


THUMBSCREW SAFETY

Thumbscrews should be tightened by hand only.

Before winding yarn, confirm that:

• All four thumbscrews are securely tightened

• Each slider upright remains firmly in position

• No upright moves when gently checked by hand

Do not overtighten the thumbscrews.

Excessive tightening may damage the thumbscrew, slider, arm, or wooden components.


LOADING A SKEIN

Stop the Swift completely before loading yarn.

Place the skein around all four uprights.

Confirm that:

• The skein is supported by all four uprights

• The uprights are evenly positioned

• The yarn is not excessively stretched

• The yarn is not caught beneath a slider or thumbscrew

• The skein can move freely as the Swift rotates

Adjust the Swift to fit the skein rather than excessively stretching the skein to fit the Swift.


SAFE USE

Begin rotating the Swift slowly and confirm that the skein feeds normally.

During use:

• Keep hands clear of the rotating arms and uprights

• Maintain a controlled winding speed

• Do not spin the Swift unnecessarily fast

• Do not place objects in the path of the rotating arms

• Do not attempt to move an upright or loosen a thumbscrew while the Swift is rotating

• Do not make adjustments while yarn is under tension

If the yarn tangles, catches, or stops feeding normally:

• Stop the Swift

• Release or reduce yarn tension

• Correct the problem

• Confirm all uprights remain securely positioned

• Resume only after the setup is stable


BALANCE

All four slider uprights should be positioned approximately the same distance from the center of the Swift.

Uneven positioning may:

• Cause irregular rotation

• Create unnecessary vibration

• Make the skein difficult to manage

• Increase the likelihood of yarn slipping from an upright

Recheck upright positioning whenever the skein size is changed.


HANDLE

Use the 1/4" handle only for its intended function on the Swift.

Before use:

• Confirm the handle is properly installed

• Make sure it is not cracked, loose, or damaged

Do not use excessive force on the handle.

Do not use the handle to lift or carry the complete assembled Swift.


STABLE WORK SURFACE

Use the Adjustable Yarn Swift on a stable, level surface.

The rubber feet are intended to help stabilize the base during normal use.

Before winding:

• Confirm that all rubber feet contact the surface normally

• Make sure the Swift does not rock or tip

• Keep the work surface free from objects that could interfere with the rotating arms

Stop use if the base begins moving excessively during operation.


CARE

• Remove loose yarn and fiber after use

• Keep wooden components clean and dry

• Do not soak or submerge the Swift in water

• Do not use harsh cleaners, solvents, or chemicals that could damage the wood or components

• Wipe with a soft dry or slightly damp cloth when necessary

• Allow all components to dry completely before storage if they become damp

• Periodically inspect thumbscrews, slider uprights, arms, handle, carousel, and base for wear or damage


STORAGE

The Adjustable Yarn Swift is designed to be disassembled for compact storage.

For storage:

• Remove yarn from the Swift

• Remove the adjustable uprights as appropriate

• Remove the arms and handle

• Keep thumbscrews, washer, and small components together

• Store the Swift flat where practical

• Store in a clean, dry location

• Protect the arms and uprights from bending, crushing, or impact

• Avoid excessive heat and moisture


DISCONTINUE USE

Stop using the Adjustable Yarn Swift if:

• A wooden component cracks or splits

• An arm or slider upright becomes damaged

• A thumbscrew no longer holds its upright securely

• The carousel binds or becomes unstable

• The handle becomes loose or damaged

• The Swift cannot remain stable on the work surface

• Any condition develops that could interfere with safe or controlled rotation

Manufacturer / Supplier Contact Information
Jason Riley
Riley Wood and Fiber Art
2304 N. Freya
Spokane, WA 99217
United States
Email: jason@rileywoodandfiberart.com
Phone: 509-425-5393
Website: rileywoodandfiberart.com
EU Authorized Representative / Responsible Person
TerrainQ Solutions UG (haftungsbeschränkt)
Franz-Ehrlich-Straße 12
12489 Berlin
Germany
Email: info@cert-rep.com
Phone: +49 176 43242825

You may also like