Warping Board — 4.5 & 13 Yard

🎉 Pre-Order Now — Ships by July 31, 2026

I'm currently taking pre-orders on the Warping Board. These are being handcrafted now and will ship no later than July 31, 2026. Order today to be among the first to get yours. I'll keep you updated every step of the way, and as always, I'm just a message away if you have any questions.

A warping board built for weavers who care about precision.

Winding a warp should be the most meditative part of your weaving process — not a source of tangles, uneven tension, or miscounted lengths. This handcrafted hardwood Warping Board is designed to wind smooth, consistent warps with absolute control over length and tension, so every thread arrives at the loom ready to weave.

Available in two sizes — 4.5 yards and 13 yards — to suit everything from small rigid heddle projects to longer floor loom warps. Both sizes let you wind to any increment within their range, so one board covers a wide variety of project lengths.

Built with the same attention to craft as every tool that leaves my bench, it's designed to be a working part of your studio — not a wall decoration.

Key Features:

• ✓ Hardwood pegs glued permanently in place — no wobble, no shifting, no loose parts mid-warp
• ✓ Pegs protrude 6.5" for a secure, comfortable grip on every pass
• ✓ Two D-rings on the top stile and two ¼" holes on the bottom stile for flexible mounting — wall hang or table clamp
• ✓ Wind any whole-yard length (13-yard board) or any half-yard length (4.5-yard board) within the board's range
• ✓ Winds consistent, even tension across every thread for a smooth, tangle-free warp
• ✓ Every corner finished with a 45° chamfer for a smooth, refined feel in hand
• ✓ Made from premium hardwood with the same exacting standards as every tool that leaves my bench
• ✓ Proudly handcrafted in America

Wind Any Length. Not Just One.

The 13-yard board lets you wind any whole-yard length from 1 to 13 yards — wind a 2-yard sample warp just as easily as a full 13-yard project warp, all on the same board. The 4.5-yard board lets you wind any half-yard length from ½ to 4½ yards, giving you precise control over shorter warps. Whatever your project calls for, you wind exactly that — no more, no less.

Two Ways to Mount. One Solid Board.

The Warping Board is designed to work the way you work. Hang it on the wall using the two D-rings on the top stile for convenient storage and casual winding. Or use hackle hooks through the two ¼" holes on the bottom stile to clamp it firmly to your table — my preferred method for active winding, where a rock-solid board makes all the difference in keeping tension consistent from the first thread to the last.

How to Use:

Secure the board to your table using hackle hooks through the bottom stile holes, or hang it on the wall using the D-rings on the top stile. Tie your warp thread to the first peg and wind back and forth across the pegs to your desired length, counting each pass to track your thread count — on the 13-yard board each full circuit adds one yard, and on the 4.5-yard board each increment adds a half yard. Tie off your cross using the two dedicated cross pegs on the top stile before removing the warp to keep threads in order at the loom.

What's Included:

• 4.5-yard board: 2 maple rails (1" × 1.25") with 5 pegs each, a top stile (17") with 2 cross pegs and 2 D-rings, a bottom stile (17"), 4 hex head bolts (1½"), and 4 #12 × .562" washers for assembly.
• 13-yard board: 2 maple rails (1" × 1.25") with 7 pegs each, a top stile (34") with 2 cross pegs and 2 D-rings, a bottom stile (34"), 4 hex head bolts (1½"), and 4 #12 × .562" washers for assembly.

Care & Storage:

Wipe clean with a dry cloth after use. Avoid prolonged exposure to moisture or direct sunlight, which can cause wood to warp or check over time. Hang on the wall using the built-in D-rings when not in use. A well-cared-for hardwood tool will last for years of studio use.

If you have any questions, comments, or concerns about this or any of my products, please don't hesitate to contact me. I'm always here to answer questions and give advice or tips on any of my products and their uses. I typically respond within five minutes, which I believe is extremely important in building rapport, credibility, and getting to know you as a customer.

Proudly Made in America

Thank you so much for considering my shop.

General Product Safety Regulation (GPSR) Information

• Intended Use: Designed as a handcrafted warping board for winding consistent, measured warp threads for weaving. Available in 4.5-yard and 13-yard sizes.
• Product Composition: Made from premium hardwood. No finish applied—natural wood only.
• Age Restrictions: Suitable for ages 12 and up. Not a toy. Adult supervision recommended for younger users.
• Potential Hazards: Wood may splinter if damaged or dropped. Keep away from children under 3. Handle with care to avoid injury.
• Usage Instructions: Secure board to stable surface using hackle hooks or c-clamps or hang on wall using D-rings. Wind warp thread around pegs to desired length and thread count. Tie off cross before removing warp. Replace if damaged, cracked, or splintered.
• Care and Maintenance: Wipe clean with dry cloth. Do not expose to excessive moisture. Store in dry environment away from direct sunlight. Inspect regularly for cracks, splinters, or damage.
• Disposal Instructions: Made from natural hardwood. May be recyclable or compostable depending on local guidelines. Dispose of responsibly according to local waste regulations.

Riley Wood and Fiber Art

Spokane, WA 99217

jason@rileywoodandfiberart.com