Aztec Sun Stone Wall Hanging - Large 3D Carved Design

GENERAL PRODUCT SAFETY REGULATION (GPSR) INFORMATION

Intended Use:
Handcrafted decorative wooden wall hanging intended for indoor wall display.

Approximate Specifications:
• Overall diameter: over 19"
• Center medallion diameter: 15.5"
• Thickness: approximately 1.25"
• Weight: approximately 7 lb
• Recess depth: approximately 0.5"

Materials:
• Laminated solid cherry wood
• Epoxy resin finish

Design Features:
• Recessed Aztec Sun Stone medallion
• Three-dimensional carved sun rays around the outer edge
• Undulating carved surfaces that taper toward the wall
• Two rear chamfered keyhole slots aligned vertically
• Keyhole slots spaced approximately 11" apart

Because this piece is handcrafted from natural wood, variations in grain, color, figure, texture, and handmade character are expected.


CAUTION — HEAVY WALL-MOUNTED OBJECT

This wall hanging weighs approximately 7 lb.

Improper installation could allow the artwork to fall and cause injury or property damage.

• Installation should be performed by an adult

• Use mounting hardware appropriate for the wall construction and capable of safely supporting the artwork

• Hardware should be rated for at least 15–20 lb

• Use appropriate wall anchors or fasten into a wall stud where necessary

• Do not install over beds, cribs, play areas, seating areas, or other locations where a falling object could cause injury

• Keep children and pets away from the artwork during installation

• This is decorative wall art, not a toy


BEFORE INSTALLATION

Inspect the wall hanging before mounting.

Do not install or display the piece if:

• The laminated wooden body is cracked, split, severely warped, or structurally damaged

• The epoxy finish is severely cracked, lifting, separating, or damaged in a way that exposes unstable material

• A carved ray or other projecting detail is loose, broken, or structurally damaged

• Either keyhole slot is cracked, damaged, or weakened

• Hazardous splinters or sharp damaged edges are present

• Any condition could interfere with secure mounting or safe display


WALL MOUNTING

The back of the artwork includes two chamfered keyhole slots aligned vertically and spaced approximately 11" apart.

The piece may be supported using one or two appropriately installed screws, but two mounting points are recommended for greater stability.

If using two screws:

• Position the screws approximately 11" apart vertically

• Confirm both screws align with the keyhole slots

• Use screws and wall anchors appropriate for the wall material

• Make sure both fasteners are firmly secured before hanging the artwork

If mounting into drywall, use an appropriate drywall anchor unless the screw is secured directly into a suitable wall stud.

Do not rely on loose, undersized, damaged, or inappropriate mounting hardware.


KEYHOLE INSTALLATION

To mount the artwork:

• Support the artwork securely with both hands

• Align the wide openings of the keyhole slots with the installed screw heads

• Carefully place the artwork over the screw heads

• Slide the artwork into the narrow portions of the keyhole slots until fully seated

• Confirm the artwork rests securely against the wall

• Gently test the installation before releasing the piece completely

Do not force an oversized screw head into a keyhole slot.

Do not enlarge, carve, or otherwise modify the keyhole slots to accommodate incompatible mounting hardware.


SECURE INSTALLATION

After mounting, confirm that:

• The keyhole slots are fully engaged with the mounting hardware

• The artwork does not lift away from the screws unexpectedly

• The mounting hardware does not move or loosen

• The piece rests securely against the wall

• The artwork does not rock or shift excessively

Periodically inspect the mounting hardware, especially after the artwork has been moved, bumped, or removed and reinstalled.


3D CARVED RAYS

The outer sun rays are deeply carved three-dimensional decorative elements.

Some carved areas may project outward or form narrow edges as part of the design.

• Handle the carved perimeter carefully

• Do not pull, twist, pry, or lift the artwork by an individual carved ray

• Avoid striking the carved edges against walls, furniture, floors, or other objects

• Do not install where people are likely to brush against or bump the carved perimeter

• Keep the carved details away from the face and eyes during handling

A damaged carved edge may become sharper or splintered.

Discontinue normal handling or display if significant damage develops.


HANDLING

Because of the size and weight of this artwork:

• Support the main wooden body with both hands when practical

• Do not lift or carry the piece by the carved rays

• Do not carry the artwork by the keyhole slots

• Keep a secure grip during installation or removal

• Avoid dropping or striking the artwork

Use additional assistance if needed to safely position the piece during installation.


EPOXY RESIN SURFACE

The central carved area is sealed with a high-gloss epoxy resin finish.

Do not:

• Cut, drill, sand, grind, burn, or intentionally alter the cured resin surface

• Expose the artwork to open flame or excessive heat

• Use harsh solvents or abrasive cleaners on the epoxy

• Place hot objects against the resin surface

If the epoxy becomes severely cracked, separated, or damaged, avoid handling damaged edges until the condition has been evaluated.


INDOOR DISPLAY ONLY

Display in a climate-controlled indoor environment.

Avoid:

• Excessive humidity

• Prolonged moisture exposure

• Rapid temperature changes

• Excessive heat

• Open flames

• Prolonged direct sunlight where practical

Wood movement caused by severe environmental changes may affect the laminated structure, carved details, epoxy finish, or mounting fit.


PLACEMENT

Choose the display location carefully.

Do not install:

• Over a bed

• Over a crib

• Over a child's play area

• Directly above regularly occupied seating

• In a narrow walkway where the carved perimeter may be struck

• On an unstable or unsuitable wall

• Where doors or furniture can repeatedly contact the artwork

• Near open flame or significant heat sources


CARE

• Dust gently with a soft, dry cloth

• Do not use abrasive pads or cleaners

• Do not use harsh chemicals or solvents

• Do not soak or wash the artwork

• Avoid excessive moisture

• Take care around the carved outer rays while cleaning

• Do not apply heavy pressure to carved details

• Periodically inspect the keyhole slots and wall-mounting hardware


STORAGE

If the artwork is removed from the wall:

• Store in a clean, dry, climate-controlled location

• Lay flat in a protected area where practical

• Protect the carved perimeter from impact

• Do not stack heavy objects on top of the artwork

• Protect the epoxy surface from scratching

• Protect the keyhole slots from damage

• Keep away from excessive heat, moisture, and rapid temperature changes


DISCONTINUE DISPLAY

Remove the artwork from display if:

• A keyhole slot becomes cracked or damaged

• Mounting hardware becomes loose or unstable

• The laminated wood develops significant structural cracking or separation

• A carved ray or perimeter section becomes loose or badly damaged

• The epoxy surface develops damage that creates unstable or sharp edges

• Hazardous splinters develop

• Any condition develops that could interfere with secure mounting or safe display