Adjustable Yarn Swift

🎉 Pre-Order Now — Ships by August 31, 2026

I'm currently taking pre-orders on the Yarn Swift - Fully Adjustable. These are being handcrafted now and will ship no later than August 31, 2026. Order today to be among the first to get yours. I'll keep you updated every step of the way, and as always, I'm just a message away if you have any questions.

A yarn swift that locks in exactly where you need it — every time.

The Yarn Swift - Fully Adjustable gives you complete control over your skein length. Each arm features a sliding block with a thumbscrew — slide it to where you want it, tighten the thumbscrew by hand, and it stays exactly there until you're ready to change it. One arm is marked at the 1, 1.5, and 2-yard positions so you can dial in a perfect, consistent skein in seconds. But the sliders aren't limited to those marks — position them anywhere along the arm and lock them there.

Slightly larger than the standard swift, it's built for spinners and weavers who want precision without compromise.

Two Ways to Use It:

• Skeining from a bobbin or center-pull ball: Slide each block to one of the marked positions — 1, 1.5, or 2 yards — and tighten the thumbscrew. Wind your yarn around the arms, counting revolutions. Every wrap is a known, fixed length, so the math is simple: wraps × skein setting = total yards.
• Winding into a ball or cake: Place your existing skein on the swift, then slide each block outward until it meets the skein snugly. Tighten the thumbscrew to hold that position. The swift now holds your skein at the correct tension for smooth, even winding onto a ball winder — no collapsing, no tangling.

Key Features:

• ✓ Fully adjustable sliders on every arm — slide the block to any position, tighten the thumbscrew by hand to lock; loosen to adjust when a different skein size is needed
• ✓ One arm marked at 1, 1.5, and 2-yard positions for instant, repeatable skein lengths
• ✓ Slightly larger build for greater versatility with longer skeins
• ✓ Rubber feet on the base keep the swift firmly in place on any surface while you wind — no slipping, no chasing
• ✓ Square arms fit precisely into precision-cut square holes in the carousel for a solid, wobble-free connection at every setting
• ✓ Every corner finished with a 45° chamfer for a smooth, refined feel in hand
• ✓ Included plastic washer lets you tune your winding experience — use it for reduced friction and faster, free-spinning winding, or remove it when maximum tension control is what the yarn demands
• ✓ Fully breaks down for compact storage — arms and carousel disassemble quickly and pack neatly into the included bag
• ✓ Includes a winding handle for smooth, comfortable skein winding by hand
• ✓ Proudly handcrafted in America

Three Marked Lengths. Lock In Anywhere.

• 1-yard setting — ideal for small samples and color tests; count wraps to track yardage precisely
• 1.5-yard setting — a practical middle ground for winding longer samples or smaller project skeins
• 2-yard setting — winds to the industry-standard skein length, perfect for dyeing, displaying, gifting, and calculating total yardage
• Any length in between — slide, lock, and wind at whatever position your project demands

Built for Spinners and Weavers Alike:

The swift's versatility extends well beyond one discipline. Spinners can wind finished bobbins directly onto the swift to create measured skeins, or use it in reverse to feed yarn from a skein onto a ball winder. Weavers can use it to measure precise yarn lengths before winding onto a boat shuttle bobbin, or to portion out yarn for smaller warp sections before sitting down at the loom. However you work, the Fully Adjustable Yarn Swift -  fits naturally into your process.

Counting Yardage:

Because each revolution equals a fixed, known length, the math is simple: wraps × skein setting = total yards. Wind 50 wraps on the 2-yard setting and you have exactly 100 yards. No scale, no estimating — just an accurate count every time.

What's Included:

Each Yarn Swift - ships complete and ready to use: base with rubber feet, carousel, 4 arms with fully adjustable sliders, plastic washer, 1/4" handle, four 3/8" uprights, and a carry bag to keep everything together when you're not at the bench.

Care & Storage:

Wipe clean with a dry cloth after use. Avoid prolonged exposure to moisture or direct sunlight, which can cause wood to warp or check over time. Store flat or hang when not in use. Inspect the arms, sliders, and thumbscrews periodically — a well-cared-for hardwood tool will last for years of studio use.

If you have any questions, comments, or concerns about this or any of my products, please don't hesitate to contact me. I'm always here to answer questions and give advice or tips on any of my products and their uses. I typically respond within five minutes, which I believe is extremely important in building rapport, credibility, and getting to know you as a customer.

Proudly Made in America

Thank you so much for considering my shop.

General Product Safety Regulation (GPSR) Information

Intended Use: Designed as a handcrafted yarn swift for winding consistent, measured skeins of yarn or fiber. Each arm features a fully adjustable slider with thumbscrew that can be set and secured at any position, with one arm marked at 1-yard, 1.5-yard, and 2-yard settings.

Product Composition: Made from premium hardwood with metal thumbscrew hardware. No finish applied to wood — natural wood only.

Age Restrictions: Suitable for ages 12 and up. Not a toy. Adult supervision recommended for younger users.

Potential Hazards: Wood may splinter if damaged or dropped. Keep away from children under 3. Handle with care to avoid injury.

Usage Instructions: Slide each arm's block to the desired skein length and tighten the thumbscrew to lock in place. Wind yarn or fiber around the arms to create a measured skein, or place an existing skein on the swift and adjust sliders to fit before winding onto a ball winder. Remove skein carefully when complete. Replace if damaged, cracked, or splintered.

Care and Maintenance: Wipe clean with dry cloth. Do not expose to excessive moisture. Store in dry environment away from direct sunlight. Inspect regularly for cracks, splinters, or damage to arms, sliders, and thumbscrew mechanisms.

Disposal Instructions: Made from natural hardwood and metal hardware. Dispose of responsibly according to local waste regulations.

Riley Wood and Fiber Art

Spokane, WA 99217

jason@rileywoodandfiberart.com