Hackle Covers

Hackle Covers - Precision-engineered covers that shield your hackle's tines from damage while protecting you, your pets, and your family

Precision-fitted protective covers designed specifically for Riley Wood and Fiber Art hackles. Available for 3.5" hackles in Double Row and Triple Row configurations (both Standard and Fine Tooth), and for 6", 12", and 18" Double Row Standard hackles.

Key Features:

• ✓ Precision-engineered to fit Riley Wood and Fiber Art hackles perfectly
• ✓ Protects sharp tines from damage during storage and transport
• ✓ Keeps you, pets, and children safe from accidental injuries
• ✓ Durable construction with 275 paracord and mild steel pins
• ✓ Non-adjustable design ensures secure, permanent fit
• ✓ Covers first inch of tines with zero play between wood and tines

     This item does not include the Hackle.

These covers are designed to fit our Standard Wool/Fiber Hackles and Fine Tooth Wool/Fiber Hackles. If you would like hackle hooks to secure your hackle to a table, they can be found here —> Hackle Hooks

     These Hackle Covers will protect your hackle tines from damage, prevent injuries to you and others, and help ensure safety when left unattended, when traveling, or around curious children.

     If you think you'll want one of these protective covers, I advise you to purchase it at the same time you buy your hackle. That way I can ensure it will fit and be the correct size/length for your hackle. The reason for this is because I have modified and made subsequent models better. If you are buying these together with a hackle, I may have a listing for that specifically and you will save a few dollars.

     A precision recess that perfectly matches the hackle tine configuration. The recess even matches the tines’ tapering on each side. They will effortlessly slide over the tines with no play between the wood and tines.

     You can even attach the covers in a hurry with fiber on if necessary. You can also have the cover on while diz'ing or blending/combing. This is especially helpful if you have curious cats, dogs, or children around.

     For maximum safety, use C-Clamps to attach your hackle. This allows the pins to secure the cover completely.

     The pins are made from 275 paracord and mild steel. Each pin uses a 1" piece of ¼" diameter mild steel round bar. Both ends are chamfered. Then I counterbored one side of the pin, (which is essentially drilling a slightly bigger hole than the through hole). The through hole is slightly bigger than the paracord. I then melted one end of the paracord and pulled it into the counterbore for a non-adjustable way of permanently attaching. For the other side I’ve essentially done the same thing. The Hackle Covers are not adjustable because they will never need adjusting. Paracord will not stretch and the unseen melted end inserted in the pins will not slip or slide out. The pin is approximately .002” smaller and should never come out until you literally pull it out. This is a super precise/precision hole that makes these covers, and the way you attach them is much better than other makers' covers.

     This gives these Hackle Covers a super clean look with unmatched safety on the market.

     The Hackle Covers are super easy to put on your hackle. Simply find one end of the tines with the cover, carefully capture all tines, and slide down. Insert retaining pin, eliminate any slack between that pin and the other and simply insert the other pin. Never needs adjusting. It will always fit and keep your Riley Wood and Fiber Art Hackles safe and secure from you, pets, and most importantly, children.

     If you have any questions, comments, or concerns about this, or any of my products, please, do not hesitate to contact me. I’m always here to answer questions, give advice or tips on any of my products, uses/capabilities. I typically respond within five minutes, which I believe is extremely important in building rapport, credibility, integrity, and in getting to know you as a customer, when appropriate.

Proudly Made in America

Thank you so much for considering my shop.

Required GPSR Information

Product Safety for Wool Hackle Covers

• Intended Use: Designed to protect Riley Wood and Fiber Art hackle tines from damage during storage and transport, and to prevent accidental injuries from sharp tines. Wooden cover slides over tines and secures to hackle using metal pins with paracord that insert through the hackle's mounting holes.
• Age Restrictions: Suitable for adult use. Not recommended for children under the age of 12 due to small parts (metal pins) that may pose a choking hazard.
• Potential Hazards: Sharp hackle tines may cause injury if cover is removed or improperly installed. Pinch risk may occur when inserting or removing metal pins through hackle mounting holes. Keep away from small children and pets. Ensure cover is securely attached with both pins inserted before leaving hackle unattended.
• Usage Instructions: Slide wooden cover over hackle tines until fully seated. Insert first metal pin through hackle mounting hole to secure cover. Eliminate slack in paracord and insert second pin through opposite mounting hole. Ensure both pins are secure before storing or transporting. To remove, carefully pull out pins from hackle holes and slide cover off tines. Do not force or yank.
• Care and Maintenance: Wipe wooden cover clean with a dry or slightly damp cloth. Check metal pins and paracord regularly for wear or damage. Store in a dry environment to prevent wood degradation. If cover, pins, or paracord are damaged or excessively worn, replace promptly to maintain functionality and safety.
• Disposal Instructions: Dispose of responsibly according to local waste regulations. Wood components may be recyclable or compostable depending on local guidelines. Metal pins should be recycled as scrap metal. Separate paracord and dispose according to local synthetic material guidelines.

Riley Wood and Fiber Art

Spokane, Washington

jason@rileywoodandfiberart.com